Dustproofing of tank polishing machines

        Tank polishing machine is mainly used for stainless steel tubes, tanks, barrels, round tubes, round bars, square tubes and other stainless steel products, the technical requirements in the polishing process polishing machine plane running to achieve automatic polishing function, adding abrasive will produce physical reaction, to achieve polishing, gloss, three-dimensional effect. Stainless steel polishing machine can also polish curved surfaces of sanitary ware, hardware handles, etc., in the polishing process is more demanding, so the quality of the polishing machine is also very important.

        For the polishing machine, the tank polishing machine belongs to one of the more commonly used. Here, it should be emphasized that no matter which kind of polishing machine, before each use, it should be adjusted accordingly, so as to better ensure the quality of production. Here, we will introduce the adjustment method of the tank polishing machine introduction, we use the tank polishing machine to polish the workpiece, the operator should first understand the polishing rate to be used. The big advantage of doing so is that the wear layer of the polished parts can be quickly cleaned off, and ultimately achieve the purpose of the complete disappearance of false tissue. And in order to realize the results of this polishing, must ensure that the abrasive thicker, after adjusting the use of this function, can make the polishing rate further increase.

　　Five methods of canister polishing machine dustproof:

　　1, the strict implementation of the tank polishing machine safety operating procedures and labor protection system, strictly prohibit staff training is unqualified and not in accordance with the provisions of the use of anti-dust, anti-static and other labor protection products to wear on duty.

　　2, must be equipped with aluminum and magnesium and other metal dust production, collection, storage of waterproof and moisture-proof facilities, dust is strictly prohibited in the wet spontaneous combustion.

　　3, to ensure that the workplace meets the requirements of standards and specifications, is strictly prohibited to set up in violation of multi-storey houses, safety spacing does not meet the standard plant and residential areas.

　　4, according to the standard specification design, installation, use and maintenance of ventilation and dust removal system. According to the provisions of the test and standardize the cleanup of dust, dust removal system during the shutdown and dust exceeding the standard is strictly prohibited when the operation, and shut down and withdraw people.

　　5, the use of explosion-proof electrical equipment in accordance with the norms, the implementation of lightning, anti-static and other measures to ensure that the equipment and facilities grounded, strictly prohibit the presence of various types of open flame in the workplace and the illegal use of operating tools.