Why Does Your Flat Polishing Machine Motor Overheat ?

       Many users in the use of flat polishing machine equipment, may find that the hand touch equipment is very hot, accompanied by the phenomenon of insufficient operating power. What exactly is the cause of this? Below, Anhui Xin Yida polishing machinery to say flat polishing machine motor fever.

　　1 overloaded operation:

        This is at the beginning of the use of the time we do not feel, but after a period of time the temperature will rise sharply. This situation is generally insufficient supply voltage or equipment overload. Such as a small flat polishing machine, polishing longer workpieces, and the bracket is not installed guide wheel, so that when polishing, the resistance of the workpiece conveyor will be very large, increasing the motor's operating load, with a short period of time will feel the motor is very hot.

        2 poor heat dissipation motor:

        This situation generally occurs in small processing plant, due to the production task is tight, very little cleaning and maintenance of the equipment, resulting in the motor cooling holes covered with a large amount of dust, its heat dissipation is greatly reduced, there will be a motor overheating phenomenon. Therefore, it is necessary to often more motor cleaning and maintenance.

　    The above is the reason why the motor of the flat polishing machine has a high fever, if you want to know more information about the polishing machine equipment, you are welcome to pay attention to our official website or call us for advice!