Eco-friendly polishing machine adds dust removal device

       Polishing machine is usually used in the workshop, now people are more aware of environmental protection, many workers are not willing to work in the dusty workshop, so, according to the user's needs, based on the original design added dust removal device.

       After installing the dust removal device, there will be no more dust or powder flying when polishing, and it also plays a role in protecting the health of the operators. The metal powder produced by polishing can be collected to prevent metal powder from flying everywhere in the workshop. A few days ago, I received a call from a user in Henan, he said that workers now have higher requirements for the working environment, especially metal powder, inhaled into the lungs of the human body's health has a great impact on the special requirements for the installation of dust removal devices, to create a good working environment for workers.

　　Use the polishing machine polishing, leaving some scratches on it, not up to the requirements of polishing, what to do? Encounter such a situation first do not be anxious, first check whether the polishing wheel used too long, need to be replaced, you can try to replace the new polishing wheel, and then polishing, to see whether it can solve the problem of scratches.

　　If the replacement of the new polishing wheel or scratches, is not polishing improper operation, if the work in the polishing before there are scratches, in the rough casting to remove all the scratches, polishing, try to walk slowly, if not once the scratches thrown away, but also with the same method and then polish again until all thrown away, and then with a more precise casting.

　　Now the multi-group cylindrical polishing machine is more suitable for polishing the round tube with scratches, multiple polishing head polishing at the same time, the front of the polishing wheel is used for rough polishing, the back of the polishing wheel is used for fine polishing, one time down to complete the polishing, is more suitable for polishing with scratches or pockmarks on the round tube or round bar.