Ring Welding Seam Roller Press

The external dimensions of the machine tool are: length * width * height 1.7 meters * 0.8 meters * 3.1 meters.

Total power of the machine tool: 4KW; Total mass of the machine tool: 3.5T

The rolling range of the machine tool: simple body diameter φ0.6 meters - φ4 meters

For φ0.6 meters to φ0.8 meters, with a height less than 0.6 meters:

Maximum rolling depth: 2 meters

Maximum rolling thickness: 1.5 - 8 mm;

Rolling speed: 0.6 - 3 meters

Rolling instructions:
1. Before rolling, pre-adjust the height of each workpiece support roller according to the height of the weld seam.
2. Hoist the workpiece into the U-shaped frame.
3. Fine-tune the workpiece support rollers again to ensure that the middle of the rolling wheel is directly opposite the weld seam.
4. Start the hydraulic system, and the hydraulic cylinder extends to press the workpiece with the driven roller wheel.
5. Adjust the workpiece guide frame to assist in providing lateral support for the workpiece.
6. Start the rolling wheel and adjust to an appropriate speed to roll the weld seam.
7. When rolling is complete, stop the rotation of the rolling wheel and retract the rolling cylinder.
8. Hoist out the workpiece.