Anhui Xinyida Equipment Consumables Introduction

In order to better understand and use the company's consumables (abrasive belts, cloth wheels, millipore wheels, nylon wheels, sisal wheels, steel wire wheels, etc.), before use, please read the following points carefully: 

I. Scope of application: 
Apply to all kinds of stainless steel, metal, wood, furniture, stone and other areas of the surface of the surface of the large area rough polishing, grinding, descaling and grinding; on all kinds of irregular type surface polishing and shaping of the different materials in many aspects of machinery manufacturing Rust removal and grinding, with high polishing efficiency, long service life and other advantages, and widely used in automobile manufacturing, heavy machinery, ship repair, stainless steel, aluminum alloy, hardware and decorative industries.

Second, the choice of consumables: 
1, nylon wheel is an important branch of abrasives products, is the strong cutting grinding products after the abrasive belts, grinding wheels and other abrasive products. We mainly do is stacked wheel by industrial white clean cloth (Nylon Prebond) through the roller glue coating method (glue containing binder and abrasive, etc.) coated and a piece of one piece of stacked compression and baked in the oven curing, and finally punched and cut into; 
2, abrasive belts are made of substrate (cloth, paper, film), mineral sand, combining agent composition, general grinding of stainless steel, usually choose zirconium corundum material, ceramic material. 

RA 0.4 320# RA 0.8 240# 

3, the higher the line speed of the abrasive belt, the higher the grinding efficiency will be, the rough grinding belt line speed is generally 12-20m/s, fine grinding for 25-30m/s; oxide layer is thicker, the general cost-effective ceramic material, with 36 #, 40 #, 60 #, 80 #; 

4, 2B plate polishing mirror, you can directly use a cloth wheel with polishing wax; 

5, ordinary cold plate polishing can be used; 5 When polishing ordinary cold plate, you can start from 240#, 400#, 600#, cloth wheel with wax, you can get to the mirror surface, but with filigree, if there is no filigree mirror, the abrasive belt should be used to 1200# or even 4000#; 

6, hot plate is generally polished from 80#, if you need to brushed effect, you can abrasive belt sanding to 400# or 600# after the blue nylon ribbon brushed, or need to be thicker grain when using red. If you need a brushed effect, you can use blue nylon ribbon after sanding to 400# or 600#, or use red color when you need a thicker grain.