Publish time:2023-07-13 09:05:37 Popularity:0 Source:未知来源
In order to do a good job of safety management in the production workshop, the implementation of the national “Work Safety Law” to prevent and control the occurrence of safety accidents in the workshop, the development of this system, each workshop to follow:
First, all employees should accept the operating procedures and safety operations of the pre-job training, employees before going to work to wear good labor protection products, with a good helmet, strictly in accordance with the production operating procedures for the operation.
Second, the workshop prohibit drunkenness on duty, sick employees shall not be arranged to work, and effectively avoid the occurrence of safety accidents.
Third, it is strictly prohibited for employees to go to work bare-chested, wearing slippers, high-heeled shoes and clothing that is not conducive to safe production, and female employees' long hair should be dished on top of their heads, or they will bear the consequences.
Fourth, it is strictly prohibited for employees to bring non-company personnel, children into the production plant, or else hold the relevant personnel responsible.
Fifth, in the boot before work, to check the machine, confirm that there is no abnormality can be opened, empty running to confirm that there is no abnormality before the formal production operation.
Sixth, in the work of the machine found abnormal, should stop the machine to check or ask professional maintenance personnel to repair, is strictly prohibited unauthorized repair work.
Seven, in case of holidays, the company rests, the employees on duty before the end of the shift should be welding machine, loading machine, cutting machine, drilling machine, milling machine and other machinery and equipment off, cut off the power supply, the work area will be cleaned up before the end of the shift.
Eight, the electrical wiring should not be moved without authorization, not private lap, found that there are circuit wires exposed damage should be reflected in a timely manner, arrange for full-time electrician to repair.
Nine, the mechanical equipment should be maintained on a regular basis to maintain normal operation, to strengthen safety precautions.
Ten, the production area is strictly prohibited smoking, the use of open flame, the need for welding, cutting and other open-flame operations, must be made before the operation of the protection of the monitoring work before the start of the operation.