1、First put the workpiece into the track. 2、Align the center of the workpiece with the center of the mill wheel. 3、Lock the track so that the track is tilted at a certain angle (the greater the angle of tilt, the greater the forward speed of the workpiece).
Flat polishing machine industry with electricity, machinery and other industries like the existence of safety hazards is difficult to avoid, we can only do to improve their safety awareness, take good safety measures to avoid safety hazards, then what should we do?
The motor is the power source of the polishing head, and the polishing auxiliary material constitutes the whole polishing head. The polishing material is fastened to the polishing head, and after the motor power is activated, the position of the polishing head is adjusted so that the polishing material is in full contact with the object to be polished. Polishing liquid/wax is added during the polishing process to obtain a better finish. Wet polishing can be achieved by installing a water tank, water circulation system, etc. on the table. A protective cover prevents objects from falling out and hitting personnel during the polishing process, and after installing a dust collector, it can effectively eliminate indoor dust.
Five ways to dust-proof your tank polisher:
1 did not do a good job of daily inspection and maintenance 2 polishing fluid, solid wax did not use in a timely manner 3 the location of the polishing machine placed unreasonable
QQ Customer Service